Refillable butane lighters represent one of the most durable and reliable devices on the market. Of course, any device can malfunction and every device is subject to damage from incorrect handling. These devices, despite their characteristic durability, do have fragile elements and they can sometimes become damaged to the point of leaking fuel which is most often the cause of any hissing noises that one may hear emanating from the device. Troubleshooting these issues is usually fairly straightforward.
A hissing sound emanating from a lighter almost always means that there is a stuck release valve. One can experiment a bit by pushing down the fuel release button a few times to see if the problem can be remedied in this fashion. If the problem fails to return, it’s likely that there was simply a stuck valve that was moved into place by depressing and releasing the button. More severe problems require the services of a tech.
If the hissing noise is always audible, it generally means that there is a severe leak somewhere in the lighter and that there is a hazard of having the lighter explode. Lighters found in this condition should not be filled. For obvious reasons, they will lose all their fuel in short and may prove impossible to fill from the start. Do not keep such lighters filled and in one’s pocket! It’s best to let them run out of fuel on their own.
If the torch has a slow hiss and can still be lit-again, one should not attempt this-the leak may be simply the result of a leak on the refill valve or another part of the device but the leak may not have become a catastrophic issue as of yet. Any leak of pressurized gas, however, will likely be a problem that will get worse with time. A leaking torch is not a safe device and should not be used until it is properly fixed by a qualified individual.
Cigar lighters and cigarette lighters that use butane as their fuel source contain pressurized gas. Though these devices can take a lot of abuse and can provide a lifetime of safe and reliable service, they must be treated with kindness. Never stick anything into the ignition area and never subject the case to abuse. If the lighter starts hissing after such an incident, it’s likely that there is significant damage to the device that necessitates repair.
Dave Sabot is the owner of specialty store. With expert knowledge of cigar accessories, including , Dave also authors a highly rated blog featuring information on how to .
Your cigar lighter is an integral part of the smoking process, whether you have a torch lighter, dual torch or another type of lighter. However, lighter maintenance and troubleshooting should be part of your regular care regimen, in to ensure that your lighter works properly every time. That said, some smokers are unaware of the importance of bleeding your lighter. Regularly bleeding your lighter will help ensure that your smoking experience is enjoyable.
Why does your lighter need to be bled? The bleeding process ensures that all old fuel and air within the fuel chamber are eliminated. This ensures that you have a smooth, even flame, without any fears of flares or sputtering. The bleeding process is simple and effective. Youll need only a single tool and a few safety steps to ensure your lighter is performing properly.
The first step is to hold the lighter vertically, with the bottom of the lighter facing upward. Do not hold the lighter near your face or your ears during this process. Now, locate the filler nozzle, which is the metal nipple on the bottom of the lighter through which fuel is added. Once you have located the nozzle, you will need a small screwdriver or another similar tool. Depress the nozzle with the tool and you will hear the hiss of escaping gas and air. Do not perform this operation near any open flame.
In a short time, the hissing sound will stop and you can release the nozzle. Shake the lighter vigorously several times. Now, insert the tool into the filler nozzle once more. You will hear the lighter begin hissing again, though it may sputter a bit. When the hissing stops (keep the lighter away from your ears), you can refill the lighter. Maintain the upright position while refilling the lighter.
You should bleed your lighter whenever you notice that the fuel is becoming low. If your lighter does not have a means to check the fuel level, you will have to rely on the performance of the flame. Spitting or flaring are good signs that your lighter is nearing the empty mark and needs to be bled. Exercise care when bleeding and you will remain safe during this vital process.
Dave Sabot is the owner of specialty store. With expert knowledge of cigar accessories, including , Dave also authors a highly rated blog featuring .
www.buylighters.com This ultimate cigar lighter features a Quantum SST system wind resistant flame, cutter with double guillotine, extra large fuel capacity and fuel viewing window. Solid brass construction and stainless steel replaceable blades cut up a ring gauge of 50.
Are you new to the world of cigar smoking? If so, then you likely have several questions concerning the use of a cigar lighter to get that smoke lit. Of course, actually getting the cigar to light is pretty important, but you will find that there is more to consider here than just the method of applying the flame to tobacco. You will need patience, knowledge and the right set of tools. Butane torch lighters and guillotine cutters are the best options for the novice cigar smoker and will help to ensure that you have the simplest, most enjoyable smoke possible.
The first thing you need to do is to remove about 1/8th of an inch from the cap of the cigar. To do this, place the cutter on the shoulder of the cap and cut. You will find that this really only applies to guillotine cutters, though, as the process is different with scissors or a punch. When the cap has been cut, you can start the actual lighting process. However, don’t touch that flame to the cigar just yet. You need to warm it up first.
This is a process called toasting and it is required to bring the tobacco up to temperature. You should also ensure that the lighter you use is fueled with butane, rather than lighter fluid, as butane is odorless and tasteless. Therefore, it will not taint the cigar with any chemical flavors or odors. Once the cigar has been toasted, you can continue with the lighting process. Place the cigar in your mouth at a 45-degree angle. Hold the cigar’s body with one hand and use the other to hold the lighter. Light the lighter and hold the cigar over the flame. Turn the cigar in your mouth, and draw on it as it turns.
Keep turning the cigar throughout the lighting process. When the entire cigar has caught, inspect the end for any area that did not light properly. You may need to reapply the flame at this point. You can also breathe on the area to help it catch and stay lit.
Once the foot of the cigar is lit, take it out of your mouth. You’ll need to visually inspect the cigar to make sure that the entire surface was lit. If you see areas that did not light, or are only smoldering, you’ll need to relight the cigar once more. Just repeat the process above and you will have your cigar burning bright in no time. In just moments, you will be able to relax with that delightful flavor and aroma.
Dave Sabot is the owner of specialty store. With expert knowledge of cigar accessories, including , Dave also authors a highly rated blog featuring .
A reliable, working cigar lighter is essential to being able to light up whenever you want. Whether you choose butane torch lighters (a choice growing in popularity) a Zippo or a disposable option, youll probably want to know just how many lights youll get out of it. This is an understandable question. However, you will not find a simple answer. Why is there no easy answer to this question? It certainly makes a great deal of sense to ask it, as the answer will determine just how much you have to spend on additional fuel or new lighters.
Unfortunately for confirmed smokers, there is no simple answer to this question. The number of lights that a lighter is capable of producing does not necessarily equate to the number of cigars you can light. Why is this? It all boils down to flame configuration and the duration of your light. Whats this all about? In to understand this conundrum, youll need to know more about the lighting process, itself.
At least one manufacturer of disposable lighters claims that their products will light a staggering 3,000 times. However, that doesnt mean that youll be able to light or relight 3,000 cigars. Why not? You can certainly light such a lighter that many times, but you wont be able to apply that to lighting cigars. Why is there such confusion surrounding the topic?
First, you will need to consider the various flame configurations. There are double and triple jet lighters on the market, as well as single jets and disposable butane lighters. Each uses fuel differently. Obviously, the more jets there are on the lighter, the more fuel it will use. Likewise, the question of lighting duration must be answered. Not all smokers light their cigars in the same amount of time. In addition, lighting a cigar takes longer than simply depressing the igniter. You will have to maintain that flame for some time in to achieve an even light on your cigar.
Therefore, the amount of time that it takes you to light your cigar is directly proportional to the total number of lights you get out of that lighter. Does this sound confusing? If so, then you are not alone. The best option for you if you simply must know how many lights youll get out of the average cigar lighter is to put one to the test. Pickup an affordable cigar lighter and track how many cigars you are able to light with it. This will give you a good benchmark for future lighter purchases.
Dave Sabot is the owner of an online store. With expert knowledge of cigar accessories, including , Dave also authors a highly rated blog featuring .
www.buylighters.com Among the first blue flame Cigar Lighters in the world, the powerful rush of the wind resistant flame made the CG-001 known the world over as simply a “Blazer”. With its pioneering piezo quartz crystal instant ignition system the CG-001 has become the must have lighter for every cigar lover and the perfect gift for the cigar fan in your life. Features of The Torch include: our state-of-the-art piezo quartz crystal instant ignition system; A powerful wind-resistant 2500ºF blue torch flame; and one of the largest fuel reservoirs you’ll find in any lighter.